Everblue Liquid Floc is a rapid response clarifier and flocculant.
If used regularly, Liquid Floc will improve the efficiency of the filtration system, ensuring sparkling pool water. In extreme situations the contaminants are dropped to the floor and easily backwashed to waste.
Liquid Floc has no adverse effect on pH or total alkalinity, it is compatible with most with most pool chemicals and is equally effective in salt and chlorine products.
Size: 1 litre. Directions for use: Unplug automatic pool cleaner. Set pup to “Circulate”. Pour required amount into the deepest side of the pool and run pump for 6-8 hours. (Note: for improved distribution add to 5 lt of water and pour throughout the pool.)
Post treatment procedure: If a thin layer of fine sediment has formed on the pool floor, the automatic pool cleaner can be reconnected, and pump set to “Filter”. If a thicker layer of heavier sediment has formed, it is recommended that the pool is manually vacuumed with the filter set to the “Waste” position. Once the sediment has been removed, set filter to backwash and switch it on. Continue to backwash until the water waste is clear. Set the filter to rinse and run for at least 1 minute before continuing with normal filtration and chlorination with pump set to “Filter”.
Treatment quantity will vary depending on pool size. Read the product label for correct dosage.
Note: Dosage may vary according to the level of water turbidity.
Reviews
There are no reviews yet.